1, two-component neutral curing, high adhesion, high strength, excellent performance of structural silicone sealant.
2, curing speed can be adjusted, deep curing fast, short curing cycle and mechanical facilities, is conducive to the construction process.
3, the product formed after curing cold and heat resistance, no corrosion of the elastomer, high and low temperature resistance performance excellence, always maintain good strength and flexibility.
4, the metal, coated glass and other building materials, and most of the building materials with excellent bonding and sealing performance, and has a good extension, water density and other functions.
5, the product A group of white, B group of black, A:B group by volume ratio of 10:1 (mass ratio 12:1) mixed use, mixed after the color is black.
1, glass curtain wall, stone (marble, granite) curtain wall, aluminum curtain wall and metal structure engineering structural bonding assembly seal.
2, applicable to the workshop assembly curtain wall unit glass and metal components of the structural bond.
3, hollow glass two seal.
1, does not apply to all the oil, plasticizer or solvent of the surface of the object.
2, should not be used for frost or wet surfaces.
3, should not be used for long-term immersion in water or wet place all year round.
4, B component can react with the air is the water, can not be prolonged exposure in the air.
1, the curing process of the structure and the structure of the curing process will release volatile compounds, long-term inhalation of high concentrations of volatile compounds harmful to health, so the workplace should pay special attention to maintain good
2, the structure of the non curing is not suitable for a long time direct contact with the skin, such as accidentally enter the eyes, should immediately wash with plenty of water, if necessary, please check the doctor.
3, after curing the structure of plastic will not release harmful substances, it will not damage the skin.
4, the company product is only to meet the quality guarantee, but based on the construction conditions (including base material, construction method, climate differences, etc.) should be performed before pre test and independently determines whether the applicability of the products to meet the construction requirements, as the product in use for any accident caused by the improper use or loss of the company is not responsible for.
Placed in a dry environment and under 27 degrees Celsius for 9 months.
Meet the standards:
GB 16766 - 2005
Non hazardous goods transport.
A group: B 190L group: 19L